Coating News, Articles, Industry Resources,

Storage Tank Coating Case Study

This particular case, they have couple tanks located in a very remote part of the state somewhere between Midland Lubbock, Texas and Roswell, New Mexico, in a very hard to reach areas which they needed to have two tanks that were used to hold produced water, they were basically overflow tanks that were reconditioned. They [...]

Found in: , ,

Louisville Fluoride Tank Coating Case (SES)

A secondary containment area for the Louisville Water Department needed remedial work. The water is a fluoride solution destined for addition to drinking water supplies, but the project area was strictly for spillage protection from not only potential run off into adjacent ground water but also because of the proximity to the front of the [...]

Found in: , , , ,

Harpeth Valley Utilities District – Roof Coating Case Study (SES)

Harpeth Valley Utilities District needed a protective coating for the roof of a 5.0 million gallon water storage facility. Utility officials had originally specified a certain material for the project which involved considerable site preparation specified by the material manufacturer. This included sandblasting and grinding. Problem This was a roof site that, because a specific [...]

Found in:

SS Moyie Case Study: Ecodur 201 Marine Coating

(transcript) This is the SS Moyie. This is a special project on a very, very old vessel. The SS Moyie is an old Canadian Pacific steamship operating on inland British Columbia waters and is the oldest operable sternwheeler in the world. I think she was made up in 1898 and operated on the lakes since [...]

Found in: ,

Tank Internal Coating Testimonial

Dear Matt, As one of the earliest users of Castagra’s ECODUR, I am pleased to report that it has met and exceeded my expectations. Another tank in the same battery where we used ECODUR coated earlier with a conventional epoxy is failing, most likely due to the extremes of temperatures we experience. Epoxies appear to [...]

Found in: